10 Matsalar Rigon Intanit na Bidiyo

Za'a iya amfani da ragowar mai ba da hanya tare da hanyoyin sadarwa na kafaffen wuri, ƙaddara hanyoyin da kuma shapers don amfani da bayanan martaba zuwa ƙirar itace. A lokuta da dama, ana iya amfani da ragowar na'ura mai sauƙi don amfani da siffar tsari, ko don gyaran gefen ɗayan jirgi ko don ƙirƙirar ƙirar al'ada. A mafi yawancin lokuta, ana iya amfani da ɗaya ko fiye daga cikin siffofi guda goma na mai ba da hanya ta hanyar sadarwa ta hanyar sadarwa don ƙirƙirar waɗannan gefuna:

• 01 na 10

  Beading Bit

  Kayan abu mai kama da gajeren bit (a kasa) a cikin cewa yana amfani da siffar da aka tsara a gefen samfurin. Bambance-bambancen dake tsakanin bitar bitar da bitar bambance-bambance shi ne cewa bitar din yana yanke wani gefe na gefe a sama da kasa na gaba ɗaya. Bitsan ragawa yana da matsala mai hawa don hawa tare da gefen ajiya kamar yadda aka yanke.

• 02 na 10

  Chamfer Bit

  A chamfer yana da kashi 45-mataki na angled a kan gefen gefen wani yanki. Hakanan Chamfer yana da kyau, a cikin wannan bit zai iya ƙirƙirar wasu nau'i-nau'i daban-daban bisa ga zurfin yanke. Kamar yadda yake tare da bitar, wasu rassan chamfer suna da matsala wanda yake hawa a gefen gefen kayayyaki.

• 03 na 10

  Cove Bit

  An tsara zane mai ban sha'awa don yin amfani da launi mai mahimmanci. Sau da yawa, ana amfani da jigon kwakwalwa don daidaita nau'i mai nau'i ko juyayi a kan ma'auni na yanki. Alal misali, sassan layi na yin amfani da bayanan martaba da ƙwararrun bead (wanda ake kira hadin gwiwa ). Kullun yana da matsala don hawa tare da gefen kayayyaki. [br] [br] Tip: Bayanin martaba ba zai dame shi ba tare da zagaye na hanci (a kasa), wanda aka yi amfani da ita don yin tsararraki a tsakiyar wani yanki.

• 04 na 10

  Dado (Yanke-Yanke) Bit

  Akwai hanyoyi da yawa waɗanda za'a iya amfani da su don yanke bayanin martaba, wanda yake shi ne tashar tasha a tsakiyar wani yanki. Duk da yake akwai gandun daji na musamman da aka yi amfani da su don yankan dadoes a kan teburin gani , za'a iya yanke dado tare da na'ura mai ba da hanya tsakanin hanyoyin sadarwa ta amfani da kowane ɓangaren raguwa. Wadannan raguwa masu raguwa suna zo da nau'o'i daban-daban, dukansu suna kama da cewa an tsara bit ɗin ne don yanke ɗakunan ƙasa da bangarori. Wasu raguwa na madaidaiciya suna da nauyin kai-tsaye (an tsara su don ƙaddamar da laminate da ake amfani da shi a fuskar katako), amma baza'a iya amfani da ragowar baƙaƙe ba don yin katsewa.

• 05 na 10

  Dovetail Bit

  Kwaƙwalwar ƙwaƙwalwa ce mafi shahararrun amfani don ƙirƙirar wutsiyoyi don ɗaukar kayan aiki. Duk da haka, ana iya amfani da ragowar girasar ƙwayoyi don yin dadoes da zane. Bayanin mai layi yana da tushe mai tushe tare da sassan angled wanda ya fi fadi a tushe. Yawancin raƙuman raguwa ba su da wani hali, ko da yake wasu 'yan takaddun takalma ne kawai suna buƙatar ɗaukar nauyin bit.

• 06 na 10

  Ogee Bit

  Lokacin bitar, wanda ake kira a matsayin Roman Timee ya samar da wani fili, S-shaped profile. Akwai wasu bambanci game da bayanin lokaci, tare da kafadun a gefuna ko maki a tsakiyar bayanin martaba. Kamar dai sauran raguwa, Sauran mai sauƙi na lokacie sau da yawa ana sauke su tare da matsala.

• 07 na 10

  Bit Rabbit

  A taƙaice magana, zomo ne mai ɗamara a gefen wani yanki. Yayinda za a iya yanka zane ta amfani da tebur (tare da ruwa mai dadi ) ko mai sauƙi mai sauƙi mai zurfi bit, akwai kuma ragowar zane-zane mai mahimmanci, an tsara shi don hawa a gefen gefen samfurin (sau da yawa tare da maɗaukaki mai kaifi).

• 08 na 10

  Round Hanci Bit

  Gwanin mai ba da hanya mai zurfi na hanci shine yayi kama da kwakwalwa, sai dai an tsara shi don yin jigilar katako da sauti a tsakiyar wani yanki. Rawanin hanci na hanci, wani lokaci ana kiransa da raguwa-kwalliya, za a iya amfani da su don yanke ginsunan da ke cikin zurfin zurfi, amma don a yi amfani dasu yadda ya kamata, ya kamata a zartar da bit har sai bayanan da aka yanke cikin itace zai haifar da cikakken 180 -degree arc.

• 09 na 10

  Binciken Roundover

  Kamar yadda aka ambata a sama, bitar bitar ta haifar da bayanin martaba a gefen gefen wani yanki, kuma ya bambanta daga bitar a cikin wancan babu kafaye. Sau da yawa, ana amfani da wani ɓangare na bitar bitar don ƙirƙirar easing na gefen maimakon cikakken digiri 90-digiri. Kamar yadda raguwa yake yi, wasu raguwa a wasu lokuta suna da nauyin nunawa.

• 10 na 10

  V-Groove Bit

  Ka yi la'akari da yadda ake yin amfani da V-groove da yawa kamar labaran shafuka guda biyu da za a shiga a tsakiyar wani yanki, kamar yadda aka yi amfani da bitin bit. A wannan yanayin, duk da haka, bayanin martaba shine siffar V a cikin samfurin. Za'a iya amfani da bit V-groove a zurfin zurfi don ƙirƙirar tsaunuka masu yawa daban-daban.