Koyi yadda ake yin ƙirar ƙusa

01 na 08

Yadda ake yin Sanding Belts

A wani ziyarar da aka yi a kwanan nan zuwa Ali Industries, masana'antun Gator Finishing sanding system, na iya koyi matakai da ake amfani da shi don yin belin belin. Wannan labari ne mai ban sha'awa, saboda akwai wasu matakai da aka sanya su don ɗaukar belin abin da ke da ban mamaki.

Sandun belt ba kome ba ne fiye da takalman sandpaper musamman da iyakar da aka haɗuwa don samar da madauki. Saboda ƙuƙwalwar belt yana zama kamfanonin da ke haifar da matsanancin zafi, wanda zai iya tsammanin cewa hadin gwiwa da ke riƙe da iyakokin biyu zai kasance mafi ƙanƙanci, amma kamar yadda za ku gani a cikin ɗayan matakan da za a biyo baya, ƙarfin jarrabawar jarrabawar ya nuna cewa matakan da aka ɗauka don ƙirƙirar haɗin gwiwa ya fi karfi fiye da takardun da ya haɗa!

02 na 08

Yin Sandpaper Raw

Mataki na farko da za a yi belts din sandals shine ƙirƙirar takarda mai karfi musamman, tare da goyon baya na musamman na zane. Saboda belar sanders suna da wuya sosai aiki, da sanding belts dole ne musamman karfi.

Matakai na yin sandpaper don belts belts yana da mahimmanci tsari kamar yadda aka yi amfani da shi wajen yin sandpaper . Duk da haka, zane na musamman yana amfani da baya wanda ya ba da takarda ta ƙarin ƙarfi.

03 na 08

Yankan takarda

Da zarar an yi takarda takalma a cikin manyan takarda, ana sanya wa annan takarda a kan wani cutter wanda ya yanke takarda a cikin rabi mai launin mita 12 a lokacin da ake so. Ƙarshen biyu an yanke shi a wani kusurwa, wanda yake da mahimmanci ga ƙarfin haɗin gwiwa a wani mataki mai zuwa.

Bayan an katse waɗannan takalma, an kwashe su kuma suna aiki da kyau ta hannun wani mai hidima a ƙarshen na'urar injin.

04 na 08

Aiwatar da Mannewa ga Sanding Belts

Tare da takalmin takalmin da aka yanke a cikin tube don belts belin, an sanya wadannan sutura a cikin wani dogon na'ura wanda ya haɗa gwanin zuwa gefen angular takarda. An kwantar da manne dan kadan sannan kuma ya sa a matsayi matsakaici a ƙarshen na'ura.

05 na 08

Ana kiran Kevlar Tape

Bayan da ake amfani da manne a kan gefen sandan sandan sandan, ma'aikacin ma'aikata yana amfani da zane-zane mai launin shuɗi, ƙananan tevlar teflar a kan glued gefen takarda sandpaper. An cire tef daga takarda kuma an yi amfani da rabi-rabi, sa'annan a yanka shi tare da wuka mai razor, kafin a koma zuwa gunkin takarda na gaba.

06 na 08

Haɗa Ƙungiyar Sanding Belt

Bayan ana amfani da teflar tefurin, an cire takalmin sandpaper zuwa mashin inda ma'aikacin ya haɗa iyakar biyu. Wannan na'ura yana motsa ƙananan biyu tare da haɗin gwiwa ta hanyar amfani da tsarin da ake kira vulcanization. Injin yana riƙe da haɗin gwiwa a wuri na kimanin 30-seconds a matsayin hadin gwiwa. Da zarar an kammala haɗin, an halicci belin mai inganci 12 na tsawon lokacin da aka buƙata. Wannan bel an sanya shi a kan mai aika da kuma kai zuwa tashar gaba.

07 na 08

Yanke sandunan Sanding

Bayan an warkar da kwakwalwan, an yanke belts din sandan a cikin sassan da suke dacewa a kan mai launi. Wannan na'ura za a iya gyara don yanke blanks zuwa duk abin da ake bukata a fadin (yawanci ko uku ko hudu inch widths).

Aikin belin kuma an saka ɗayan a cikin wani a cikin adadin da mai bawa ya dace kuma ya shirya don kunshe.

08 na 08

Packaging

Bayan da aka yanke belin belin zuwa fadi masu dacewa kuma an saka su (a cikin ɗayan) a cikin adadin da aka dace, an saka su a cikin adadi mai dacewa don rataye a kan ƙuƙwalwar ajiyar kaya kuma an shirya akwatin kuma an shirya don sufuri.