Tsarin Bamboo da Takarda

01 na 10

Ruɗa Takarda Kasuwanci

Muna son ƙarancin fitilun fitilun waje a kan kayana a cikin dare. Me ya sa ba a ajiye takardun lantarki a cikin launuka masu kyau a kusa da ku ko a gonarku a taronku na gaba? Ka sanya wadannan takardun lantarki daga takardun lantarki, nau'in ɓoye da ƙwayoyin filastik kuma sararin samaniya za su yi murna ba tare da lokaci ba.

Wannan sana'ar lantarki yana da siffar da'irar kuma yana da ƙuƙwalwa masu launi kamar yadda aka kara da kayan ado. Kuna iya gina da yawa daga wadannan lanterns da sauri. Nada launuka da alamu daga zanen da aka fi so, yanke sassa na lantarki a kan na'urar da aka yanke da ku da tara.

Dukan fayilolin da aka yanke sun mutu a cikin wannan kyauta ta kyauta. (Wadannan fayiloli sun hada da: dxf, pdf, eps, jpeg, ai, da SVG)

Bukatun da ake bukata

• 8 Bamboo Skewers
• 1 Sheet 12 x 12 katin katin
• 1 Takardar Vellum
• Hot bindiga Gun
• Kayan Lantarki na Kayan Kayan Lantarki
• Scissors
• Digital Cut Cut Files (download nan)
• 160 Beads Beads
• Baturi da aka yi amfani da hasken wuta
• Takarda Hoto Punch
• Waya ko Ribbon don Hanging Lantern
• Sandpaper
• Mai mulki
• Xacto Knife
• 18 "tsawon waya na fure ko wani nau'i na waya mai zurfi.

02 na 10

Yanke takarda

• Sauke fayiloli don sassaƙa takarda lantarki sassa.
• Yanke yanki guda ɗaya da uku daga cikin takarda.
• Sanya ƙungiyar ciki tare da ramin rami.

03 na 10

Add Bamboo Skewers da Base Beads

• Sanya dutsen dutsen pony a kan ƙarshen ƙarshen skewer bamboo. Tabbatar cewa dutsen pony yana iya zamewa tsawon tsawon skewer. Yi amfani da manne mai ɗawainiya don biyan dutsen pony a wuri
• Maimaita sama mataki na kowane skewer bamboo.
• Dauki tushe na lantarki na takarda - madauwari mai sashi wanda ba shi da wani rami - kuma saka skewers kamar yadda yake cikin hoto a sama. Wannan zai zama goyon baya na kasa na lantarki.

04 na 10

Ƙara Beads don ƙirƙirar Layer na farko

• Sanya zane-zane guda shida a kan kowane skewer bamboo.
• Sanya murfin takarda a kan skewers kamar yadda yake a hoto a sama.

05 na 10

Gina Dama na Uku da na Uku

• Sanya wasu ƙananan katako a kan kowane katako na bamboo, kuma sama tare da wata takarda. Maimaita wannan mataki. Ya kamata fitilunku ya zama uku da takarda da takarda, kowannensu ya rabu da su na shida.
• Sanya daya dutsen katako na karshe a kan kowane skewer bamboo kuma haɗi tare da manne don gama kashe lantarki.

06 na 10

Trim Skewers

• Gyara bamboo skewers ta yin amfani da ƙirar ƙirar hanci ko fasafi. Yankuna mai laushi tare da kadan daga sandpaper idan ana so.

07 na 10

Yanke Yankin Vellum

• Ɗauki takarda mai launi na 8.5 "x 11", kuma, ta yin amfani da takarda takarda ko mai mulki da kuma wuka mai fasaha, a yanka don ƙirƙirar nau'i na jujjuya 5.25 x 10.5 ".

08 na 10

Ƙara Vellum zuwa Lantern

• Gungura daya daga cikin rassan gilashi a cikin kwandon cylinder da kuma sanya shi cikin tsakiyar takarda. Gilashin ya kamata ya rufe rabi na tsakiya na cibiyar lantarki.

09 na 10

Ƙara abu na biyu na Vellum

• Saura wata madaidaicin layi a cikin kwandon silinda kuma sanya shi a tsakiyar ginin lantarki da ke fuskantar kishiyar saiti na lantarki na farko.
• Idan kuna shirin rataya wutar lantarki ta ninki ƙananan ƙananan ramuka biyu a gefen ƙananan ɓangaren sama kuma ku gudanar da wani ƙananan waya don samar da wani makami.

10 na 10

Ƙara haske da nunawa

• Sanya baturin sarrafa haske na shayi a tsakiyar wutar lantarki da rataya ko nunawa.

Wadannan lanterns takarda za su kara wani yanayi mai ban sha'awa ga kowane taro na waje ba tare da keta banki ba kuma za a iya daidaita shi don daidaitawa tare da kowane batu.