Yadda za a yi da kyandar wuta

01 na 10

Tattara Rasu don Marbeld Rashin Kwaro

Gilashin kyandar mai ƙasƙanci yana da ƙwarewa fiye da yadda muke ba shi bashi. Ba dole ba ne ka ƙayyade kanka ga launi daya kawai. Kuna iya sanya kwandon kwalba a cikin kofi na kofi, ƙananan buckets , gilashin kifi, tebur na teku, yumbura ko gilashin giya. Idan akwati wuta ne da tabbacin sa, yiwuwar za ku iya yin fitilu daga ciki.

Wannan aikin yana amfani da jelly gilashi ko kuma irin wannan gilashi gilashi kuma yana da daji tare da launi. Dabarar ta samar da muni, marbled, kusan nauyin ƙuƙwalwa. Kowace abu ne na musamman.

Don wannan aikin, kana buƙatar kayan aiki da kayan aiki masu zuwa:

• Sunny jelly gilashi ko gilashi ganga
• Kwatanta gauraye da kakin zuma
• Wick dace don kwalba da kakin zuma
• Ƙanshi
• Ruwan ƙananan ƙwallon ƙusar wuta (ƙuƙwalwar kwakwalwan kwamfuta ba zai yi aiki ba don wannan aikin)
• Ƙungiyar Wick ko ƙuƙwalwar filastik don kiyaye wick a tsakiya
• Siffar
• Thermometer
• A tukunya don narke da kakin zuma
• Ƙananan waya ko wick pin
• Heat gun
• Hoton manne
• Toothpicks

02 na 10

Shirye-shiryen Saiti da Shirye-shirye na Gilashin Gilashin Marbled

Fara da kyandir ta bin umarnin don kyandar fitilun kamar yadda aka taƙaita a kasa:

1. Kafa wicks. Yi amfani da bambaro don rike wick. Saka dabba mai zafi a kasa na wick shafin kuma danna shi a tsakiyar akwati. Haša sandan igiya ko ƙananan filastik don kiyaye wick a tsakiya.
2. Yanke da narke da kakin zuma. Yi amfani da maƙallan lissafi a kan layi don gano yadda ake bukata don akwati. Yi nauyi a kan sikelin kuma narke shi a cikin tukunya mai narkewa. Heat zuwa kimanin 180 F.
3. Ƙara ƙanshi. Ƙara ƙanshi ga kakin zuma mai narkewa, ta amfani da 1 ounce da labanin kakin zuma. Cool da kakin zuma zuwa kimanin 150-160 F.
4. Zuba da kakin zuma cikin kwalba. Kada ku cika. Tabbatar cewa wick yana da kyau a tsakiya.

A nan ne inda ka bar daga asalin kwandon ƙirar umarnin.

03 na 10

Cool da Candle da Poke Wasu Holes

Bari kyandir ta kwantar da hankali har sai da kakin zuma ya juya a kan sassan da kuma game da inch 1/8 na fata a saman kyandir. Wannan yana ɗaukar kimanin minti 30 zuwa 45.

Riƙe da ƙananan waya ko wick fil a kan gefen ganga na ganga, yi karamin rami a saman kyandir, turawa waya har zuwa kasa na ganga.

04 na 10

Gwanar da Ƙungiyoyi

Idan kana son ainihin launuka na launi a kyandar ka, ka zana zoben tara. Idan kana son ƙarancin launi, ƙananan ramuka.

05 na 10

Ƙara Launi

Yin amfani da toothpick, dab a minti mintuna m drop of colorant a saman kowane rami. Ƙananan yana da hanya mai tsawo, don haka amfani da fiye da 1 / 6th na digo da kowane dab.

Kuna iya ƙara ƙarin, amma ba ku son ƙarawa da yawa. Ka tuna, ƙananan ƙananan rawaya na launi a saman ramukan suna aiki mafi kyau.

06 na 10

Zabi tsarin launi

Ga abin da kamannin kyandir yake kama da bayan launi da aka labbed a kan ramuka. Kulle a gefen hagu yana da launin rawaya uku, uku da launi uku na launi. Kulle a madaidaicin madaidaiciya ja da rawaya.

07 na 10

Yin Marbling

Anan ne inda abubuwa fara zafi, a zahiri.

Yin amfani da bindigar zafi, zafi na farko a kan kyandir a hankali don yatsun fara farawa tare da kakin zuma.

08 na 10

Yanke da Sides

Daga waje, zaku iya ganin cewa melted, mai launi da kakin zuma yana raguwa da ramukan.

Yanke da ɓangaren kwalba na gaba, ba tare da ɗaukar hoto sama da ƙasa ba. Yanke kowane layi, ko rami ko ramin-duk abin da kuke so ya kira shi-game da 10 seconds tare da fushin zafi sannan kuma ƙasa sannan sai ku koma zuwa gaba.

Da kakin zuma a gefen ya narke kuma ya hade tare da dye daga sama don fara farawa da yin tasiri.

09 na 10

Ci gaba Cike da Swirling

Ci gaba da ƙonawa gefen kyandir don narke da kakin zuma. Sakamakon nan ya bambanta yadu. Wannan shi ne kawai wani abu da kake jin dadin ... kuma suna mamakin.

Dye da kuma kakin zuma ci gaba da haɗuwa da kuma juye daga ƙullurar da aka yi da kakin zuma mai tsanani. Kuna iya taimakawa abubuwa ta hanyar swirling kwalba kadan kanka. Idan kana son yin cajin, yi amfani da wick pin don motsa launi a kusa da bit ma. Wani lokaci wannan wajibi ne don samun launin duk hanyar zuwa kasan akwati.

Maganar taka tsantsan : Ayyukan sulhu na cirewar cirewa na cigaba har dan lokaci ko da bayan da ka dakatar da dumama da kuma maidawa, don haka kada ka shiga cikin kwandon wuta da swirling; ilimin lissafi yana da yawa aiki a gare ku. Kimanin kashi 30 cikin dari na juyawa da marbling ya faru bayan ka dakatar da dumama da motsi kwalba.

10 na 10

Kammala Gilashi Marbled Candles

Ku tafi don dan lokaci ku bar kyandiyoyin sanyi. Lokacin da kuka dawo, za ku yi farin ciki da mamakin yadda suka fito. Gyara da wicks zuwa kimanin karfe 1/4 a saman saman kyandir. Saita kyandir don warkewa don 'yan kwanaki kafin kone shi. Ku ci gaba da tsaftace kayan aikin fitilu.

Yi la'akari da kyau, kuma za ku iya kwatanta kowane nasarar da kuke da shi, ko da yake babu wani kyandir mai kama da wani.