Yi karamin bangon Balloon

01 na 06

Kowace Kayan Kayan Kayan Bukatu na Bukatar Gilashin Balloon

Don ƙananan wuraren yin burodi a cikin ɗaki, ƙungiyar zane-zane yana da sauƙi don yin cikakken bayani. Wuraren sun kasance a kusa da shekarun 1800 don haka sun dace cikin lokaci da yawa. Idan kana aiki a kan Stuart ko Tudor dollhouse, za ka iya nuna jigon igiya da aka yi amfani da su kamar sauti don shirinka. Julia Child an ba da kyauta tare da gabatar da whisken balloon zuwa matsakaicin abinci a cikin shekarun 1950 a Amurka Har yanzu akwai ɗakunan gidajen Turai da na kantin sayar da kayayyaki, hakan ya fi tsayi a cikin sassa na Arewacin Amirka. Hotuna na Balloon sukan kasance a cikin kamfanonin azurfa, don cikakke fata masu fata ga meringues. Ana iya amfani da su don janye kayan shafawa tare, tare da saran sauya a cikin saucepan da qwai da kuma zuba su cikin batter batter.

Zaka iya yin saƙo a cikin nau'i mai yawa, kawai duba cewa ma'aunin waya yana da ƙarfi sosai don riƙe siffar 'balloon'.

Don Yin Ƙananan Farin Balloon Za Ka Bukata:

• Ƙananan ƙananan ƙananan kayan sana'a, ko Dowling 3/8 zuwa 1/4 in (5-7mm) a diamita
• Waya ko Ƙarƙashin Wuta - Na yi amfani da uku, 1 1/2 inch (3.8cm) tsawo na # 24 na ma'auni don 1:12 sikurin whisk.
• Bead na Hudu - Na yi amfani da daya wanda shine nau'in # 4, .071in. ko 1.8mm za ka iya canza wani nau'i mai nauyi
• Ƙananan adadin nau'i mai nau'i na biyu - ko amfani da manneccen manne ko manne na silicon , don rike da wayoyi a kan katako.
• Bukatattun bayanan martaba - Don ɗauka makaman katako
• Fine Sandpaper
• Razor Saw da Miter Box - don yanke kayan da aka ajiye zuwa tsawon.
• Ƙasashe na Ƙarshe ko Yanke Waya
• Ƙungiyoyi ko Bent Han Tweezers
• Ƙananan Drill ko Share Mataimakin

02 na 06

Yi Zagaye mai ɗauka daga Square Craft Wood

Don fara yin rike don ƙananan launin balloon kuɗi za ku iya amfani da ko wane ɓangare na kyauta ko wani yanki na zane-zane. Kuna so gwargwadon kayanka na karshe ya zama 1/8 inci (3mm) ko žasa a diamita bayan da aka tsara ta ta amfani da fayilolin miniature da sandpaper. Kuna buƙatar sashe na itace akalla 1/2 inch (1.2cm) tsawo. Kuna iya samin katako mai dacewa don amfani da shi azaman rike.

Da farko dai alama ta tsakiya na zane-zane na zane-zane ko kayan haɓakawa, kuma raɗa ramin rami a tsakiya na itace. Kada ku yi rawar jiki a wata kusurwa kaɗan kamar yadda kuke gani a cikin hoto a wannan shafin. Kuna son ramin raguwa don tafiya zuwa tsakiyar tsakiyar itace.

Wannan rami zai riƙe wayoyi don whisk, akalla guda shida na waya da kuka zaba. Ramin ya kamata ya zama 1/8 - 3/16 in. (3-5mm) zurfi, kuma kawai kamar yadda kake buƙatar tsawon waya shida (kashi 3 an ninka biyu) Duba dukkan matakai a cikin wannan koyaswa kafin ka yi rawar jiki rami don wayoyinku. Hakan da ka zaba ya kamata ya rufe murfin da ya fadi don kammala whisk.

03 na 06

Shirya Jagora don Gidan Farin Gidan Gidan Gidan Gida

Ƙarƙashin zane-zane mai sauƙi shine mafi sauki don tarawa yayin da aka haɗa shi zuwa ƙananan itace. Don yin amfani da magunguna, na yi amfani da fayilolin buƙata da takalma a kan sandan shinge don cire sasanninta na katako na katako kamar yadda kake gani a cikin hoton. Tsawon lokacin da na yi aiki ya kasance a cikin 1 in. (2.5 cm) tsawo don haka zan iya yanke wani makami daga sashe mai zagaye.

Yayin da kake yada sandanka ko yashi, duba cewa ka rike rami don wayoyin da ke tsakiya a cikin majinka. Ya kamata a sanya katako har zuwa lokacin da ya kai 1/8 - 3/16 inch (3 - 5mm) a diamita, yana barin wasu sarari a kusa da gefen rami wanda zai goyan bayan wayoyin whisk. A yanzu, ajiye fayil din a matsayin alƙalina. Lokacin da ka dace da wayoyi da launin launi ko murfin zuwa saman whisk, zaka buƙaci yashi ko yashi layin magoya don haɗuwa cikin ƙuƙwalwar launi idan ya yiwu.

Lokacin da kake da nauyin sarrafawa da fayil ɗin, yi amfani da sandpaper mai kyau don sassaukar da katako zuwa ƙafa.

04 na 06

Sanya Wuta don Ƙananan Balloon Whisk

Don yin wayoyi don kullun karamar karanka, ka yanke rassa 4-6, 1 1/2 inch (3.8 cm) guda na waya mai kyau, Na yi amfani da ma'auni na 24 na sikashin na 1:12. Kuna buƙatar akalla uku daidai madaidaiciya na waya ga kowane whisk. Domin samun damar da zai iya yiwuwa, tabbatar da cewa waya tana madaidaiciya ba tare da kinks ba.

Sanya wayoyi a kusa da ƙananan cylinder ta wurin lankwasa su a cikin rabin kusa da tsattsar dacewa. Na yi amfani da sashi mai sassauci na ɗaya daga cikin takalmin dogayen ingarina. Yayin da ka gama kowane ɓangare, yi amfani da kullunka don tabbatar da asalin sigina na kusa da gefe, kuma saka sashi a cikin karamar ka. Kowane sashe ya kamata a saka a kan wanda ya gabata, don su haye. Gwada saita sauti a maki na agogo, goma bayan da ashirin da biyu don waya ta farko, ashirin bayan da goma na biyu don waya ta biyu, da rabi da kuma sa'a na waya ta uku. Yi la'akari da cewa kada ku rungume madaukai kamar yadda kuke saka su. Idan ba ku da karam ɗin da ya dace, za ku iya shigar da wayoyi a cikin katako na kai tsaye, amma ga mataki na gaba don yadda za a rike wayoyi a wuri tare da manne ko epoxy putty.

Hakanan zaka iya kintar da adin ku a kan wayoyi ta yin amfani da filaye idan ya sa ya fi sauƙi don rike da wayoyi a wuri yayin da kuka saka su a cikin magoya. Ka yi ƙoƙari ka share ƙuƙwalwa a kowane bangare, don haka ya kasance gaba ɗaya, maimakon ƙaddara.

05 na 06

Ƙirƙirar Wutar Balloon Whisk a cikin Handle

Don ƙare taron jama'a na ƙwallon ƙwallon ƙafa, ku haɗa da ƙaramin nau'i mai nau'i mai nau'i na biyu (kowane iri, duba karamin launin toka a cikin hoto) kuma idan ya tsaya, ya sanya shi a cikin rami a cikin rike da whisk . Shigar da wayoyi a ƙasa da ƙwallon ƙira a cikin rike. Sake gyara na'urorin waya idan ya cancanta kuma sanya karamin adadin epoxy putty (ko zaka iya amfani da ruwan hotunan silicone). Kuna so manne ko epoxy su rike maɓuɓɓuka a cikin rike da kuma riƙe su cikin matsayi a cikin ƙuƙwalwar launi, kazalika da rike da ƙuƙwalwar ƙuƙwalwa a saman ɗayan. Idan ba a yi amfani da damba ba, saita sauti a cikin sintiri ko manne a cikin rike, da kuma kunshe da wani ɓangare na nau'i mai nauyi a cikin wayoyi, rike da nauyin nauyi ga wayoyi da kuma rike tare da bit of epoxy putty ciki da tsare.

Tabbatar cewa komai yana cikin matsayi daidai, kuma barin manne ka ko epoxy putty ya kafa kafin kammala whisk balloon. (Tabbatar cewa duk wayoyinka suna cikin matsayi daidai da daidai daidai.)

Tsaftace duk wani abu mai mahimmanci ko manya kafin ya kafa.

06 na 06

Kammala Shafawa da Gidan Farin Hanya na Balloon

Mataki na ƙarshe a kammala ƙaddamar da katakon ballon balisk shine ya yanke kayan da aka ajiye ba tare da kyautar kaya ba, kuma ya gama yin amfani da makaman. Yi wannan bayan da wayoyi da ƙwallon ƙwallon ƙafa an kafa su a cikin manne ko epoxy putty. Yi amfani da farfajiyar ganuwa da akwati miter don yanke gefen a daidai tsawon. Gudun Balloon suna bambanta sosai a cikin nau'i da tsayinta, zaka iya yin dukkanin ɗakunan abinci na cike da ƙuƙwalwar walƙiya don cin abinci na maido idan ka so.

Don ƙare ƙirƙirar rikewa bayan an yanke shi kyauta, a hankali yashi ko kuma rubuta fayil din gwargwadon inda ya hadu da tushe na ƙofar. Sand da ƙarshen rike.

Kuna iya amfani da whisk a cikin kwasfa na sauya, kuyi amfani da shi a cikin kwano mai yalwa , ko rufe shi da gari ko kullu kuma sanya shi a kan katako na gargajiya . Idan kana son wasu albarkatu masu tsami gaba ɗaya ko kuma an hade su don cin abinci, yi amfani da umarnin da ya danganta su da su daga masanan 'yan wasan kwaikwayo.

Faɗin abin da kuke yi tare da waɗannan umarnin a cikin dandalin tattaunawa. Kowane mutum na son ganin yadda kowa ya sami!