Kwanan wata Mitt Free Model

01 na 13

Yadda za a yi kuskuren Mitt

Akwai hanyoyi daban-daban don ƙuƙwalwar tanderu a cikin tanda, dangane da salon tayin mitar da kake nema. Tsarin ƙuƙwalwar zane a nan zai nuna maka yadda za a yi gajeren wuta ta wuta, wanda aka tsara don kawai rufe hannun har zuwa wuyan hannu, kodayake za'a iya fadada shi don rufe wasu kayan hannu kamar yadda mitt na gargajiya ke yi.

02 na 13

Abubuwa

Dole ne a yi amfani da tuta mai amfani da mitt ta amfani da yarn auduga. Yarn yarn ba zai shimfiɗa ba, saboda haka za ku riƙe da siffar dacewa da girman tanda mita idan an yi shi. Yarn yarn ba zai narke ba, abin da yake da muhimmanci tun lokacin da tanda tasa ta kasance tana riƙe da tukwane mai zafi da pans.

Abubuwan Da ake Bukata:

• 1 skein mafi munin nau'in yarnin fata (amfani da ita: Wool da Gang Daga Space Dyed Yarn a colorway Space Cadet Launuka)
• Girman H / 8 ƙugiya ƙira

Ƙarshen Girma:

Wannan tayin wutar lantarki yana dace da babban manya. Yi amfani da ƙananan ƙugiya na ƙwanƙwasa don ƙarin snug fit.

03 na 13

Kullin Mint Mitt

Za a yi wannan tanderu a cikin guda biyu. Za a sami manyan ƙaura biyu. da kuma karami biyu. Wadannan za a sanya kowannensu a kai-tsaye sannan a haɗa shi tare a ƙarshen gina tanda mitt.

04 na 13

Crochet Semicircles

Wannan koyaswar za ta nuna maka mataki-mataki-mataki na yadda za ka ƙirƙiri semicircles ta yin amfani da zane-zane na biyu .

Mataki na daya

Ch 3, 3 hdc a cikin uku na ch daga maɓallin (duka 4 hdc)

05 na 13

Ƙara Girman Kwancinku

Hakanan yana kara yawanci kamar yadda ƙirar ƙira .

Mataki na biyu

• Ch 2 don kunna
• Hd a daya st
• 2 hdc a kowace biyu st (total 8 hdc)

06 na 13

Ci gaba da ƙara Ƙarƙashin Ƙarƙwararku

Rukuna 3-5 daga cikin tanda na tayin mitt ana aiki kamar haka:

Mataki na Uku

• Ch 2 don kunna
• 2 hdc a st na gaba
• * 1 hdc, 2 hdc
• Maimaita daga * fadin (duka 12 hdc)

Mataki na hudu

• Ch 2 don kunna
• hdc a gaba na gaba, 2 hdc a gaba mai gaba
• * 1 hdc, 1 hdc, 2 hdc
• Maimaita daga * fadin (duka 16 hdc)

Mataki na biyar

• Ch 2 don kunna
• hdc a gaba 2 st, 2 hdc a gaba st
• * 1 hdc a kowane na gaba 3 st, 2 hdc a gaba st
• Maimaita daga * fadin (total 20 hdc)

07 na 13

Kashe Tsarin Jiki na Halitta

Da zarar ka kammala aikinka na mataki na biyar, za ka sassaukar da mai zurfi a kasa na semicircle.

Mataki na shida

• Kada ku juya aikinku. Ci gaba da aiki a kusa da ƙarshen sashin farawa, a kan ƙananan bene na semicircle.
• Hdc a ko'ina a fadin domin jimlar 20 hdc a wannan gefe.

08 na 13

Shuka Tsarin Semchercle

Yanzu za ku ci gaba da yin aiki a cikin layuka don girma tsawon wannan gefen gefen ƙwanƙwarar ƙira. A saman da'irar zai zama saman tanda mitt; yanzu kuna girma da sashi don rufe hannun zuwa wuyan hannu.

Mataki na Bakwai

• Ch 2 don juyawa, hdc a kowane sashe (total 20 hdc)
• Maimaita sau biyar.
• Ƙarshe kuma saƙa a iyakar.

09 na 13

Yi Hanya Semicircle daidai

Yi maimaita matakai 1-7 don yin saiti na biyu a girman zuwa na farko.

10 na 13

Kwanci 2 Ƙananan Yanki

Kuna buƙatar yin 2 ƙirar tsaka-tsalle. Ga kowannensu, yi da wadannan:

• Maimaita matakai 1-6
• * Ch 2 don juyawa, hdc a kowane shinge (total 20 hdc)
• Maimaita daga * 2 sau
• Ƙarshe kuma saƙa a iyakar

11 of 13

Kullin Mint Mitt, Sashe na 1

Sanya ƙananan ƙananan ƙwararru guda biyu, tare da su a ɗakin ɗakin kwana. Yi amfani da tsinkin ƙira guda ko hanyar da kuka fi so. Wadannan za su kasance cikin hannun wutan mitt, ma'anar ɓangaren mitt wanda zai taba magoya da kwanon rufi lokacin da ka kama shi. Ta hanyar fasaha, a wannan lokaci kana da mashigin ƙwaƙwalwa; kawai ninka a kungiya kuma za ku iya ɗaukar kwanon rufi.

12 daga cikin 13

Kusa da Mint Mitt Construction, Sashe na 2

Tun da yake kuna so kuyi mitt tanda, maimakon maginin tukwane, yanzu kuna buƙatar gina ƙananan fili na kowane gefen hannun. Wannan shi ne sashi da zai taɓa saman da kasa na hannunka lokacin da kake saka mita. Ana yin wannan ta hanyar haɗuwa da manyan raƙuman ruwa zuwa kananan.

Ɗauki daya daga cikin manyan rami. Riƙe ta don haka sashe mafi girma (ko'ina) yana da maƙasudin ɓangare na ƙarshen ƙananan kaɗaɗɗun yanzu. Sanya shi tare, ta yin amfani da ƙugiya guda ɗaya ko hanyar da kuka fi so, HANYA zuwa ma'anar inda ƙungiyoyi biyu suka haɗu (Ƙungiyar da ta fi girma ya fi tsayi kuma za a rataye daga ƙananan karamar).

Yi maimaitawa tare da na biyu a babban gefe.

13 na 13

Kusa da Mint Mitt Construction, Sashe na 3

Ya kamata a yanzu a iya sanya hannunka a tsakanin manyan ɓangarorin biyu, fahimtar cikin cikin ƙananan raƙuman shiga. A wasu kalmomi, kuna da ƙwaƙwalwar tanderu na ƙugiya-akwai abu ɗaya da za a yi. Lissafi na tsararru mai tsawo suna rataye a tarnaƙi, inda ka saka hannunka. Sanya su tare a kowane gefe don samun fitar da tanda mitt.

Tip: Idan kuna son yin tanda wutar lantarki wanda ya ci gaba a kan makamai, akwai zaɓi biyu:

1. Ƙara ƙarin layuka a Mataki na Bakwai don ƙananan haɗuwa biyu.
2. Haɗa yarn zuwa kowane maɓalli a cikin ƙasa bayan an riga an haɗuwa da tanda wutar, tare da zane-zane don shiga; sake maimaita zagaye zuwa tsawon da ake so.