Shirin Shiga Jig Plans

01 na 10

Gina Jig

Abincin itace, musamman kayan da ke wucewa ga katako mai girma a wuraren cibiyoyin zamani, ba shine mafi kyawun samfurori ba. Sau da yawa ba a bushe shi ba a lokacin da aka samo shi a kan raye-raye , kuma saboda gudun da aka yi girma tare da hanyoyi don milling, sau da yawa yana warps, kofuna waɗanda, masu juyawa ko bakuna kamar yadda ya dace da sauyin yanayi, inda kake shirin yin amfani da shi. Tun da ka san cewa lallai ya kamata ka bari duk abincin itace da za a yi amfani dashi a kan wani aikin da za a ba da izini kafin ka fara aiki, duk da haka sanin cewa yana iya zama mafi dacewa da ginin jirgin ruwan lokacin da yake shirye, menene za ka yi?

Idan kana da allon da ke buƙatar yin gyare-gyare kaɗan, kayan aiki na farko da zaɓaɓɓe shine mai haɗawa . Kuna iya amfani da tebur dinku don yaɗa ɗakin jirgi sau ɗaya idan kuna da ɗayan ɗalibai, shimfidar jiki na gaskiya, amma kuna buƙatar mai shiga don ƙirƙirar ɗayan.

Matsalar ita ce masu haɗin gwiwa suna da tsada da ƙari, ba daidai ba ne ga wani karamin shagon ko aiki akan wurin. Abin mahimmanci, akwai kayan aiki masu yawa don saya da farko lokacin gina ginin.

Bishara mai kyau shine cewa akwai jigon sauƙi don teburin ka ga cewa zai iya yin babban aiki na mai shiga. A cikin wannan saiti na aiki na itace, koyi yadda za a gina gilashi mai launi mai sauƙi wanda zai ba ka tsabta, madaidaicin madaidaici daga abin da za a yi gyaran kafa, yin wasu kayan haɗi ko kawai tabbatar da tsabta mai tsabta ga wannan yanki.

Matsalar Difficulty

• Tsarin katako: Matsakaici zuwa Sauƙi
• Ƙarshe: Babu

Lokaci don kammala

• 1-2 Hours

Gudanar da Kayayyakin

• Table Saw
• Ƙarfin wuta ko Ƙwararren Cordless
• Safaffen Bashar Raya da na'ura mai ba da hanya tsakanin hanyoyin sadarwa
• 1/2 "na'ura mai ba da hanya a madaidaiciya bit

Abubuwan Da ake Bukata

• 1 - 1x6 x 3 'SPF Lumber
• 1 - 12 "x 4 'na 3/4" sanded (AC) plywood
• Matsala Tape
• 1/2 "Chisel
• Fensir
• 2 - Matsalar Juye-sauke-Saukewa
• 2 - 1/2 "x 2" Hex Bolts tare da raga biyu mai laushi , 2 kwandon kulle, da kwayoyi 2
• 1-1 / 4 "Dattijai
• 3/4 "Wood Screws

02 na 10

Yanke Harshen Hoto

Don fara gina teburin ku ga jigon jigon, za ku buƙaci wani nau'i na 3/4 " nau'in mita 12" mai tsawo da 48 "cikin tsawon, da kuma 1x6, a yanka zuwa 36 inci in tsawo.Da wasu matakai, Luma kuma yana bukatar 60-inch tsawo tsiri na stock yage zuwa girma na 3/4 "x 3/8", amma za ka iya amfani da kyau duk wani yanki madaidaiciya na ɓoye stock for wannan yanki.

Kafa na'urar mai ba da hanya mai saurin kafa ta na'urarka mai tsayi da kashi 1/2 "yankan madaidaiciya, kuma sanya shi a kan kwamfutarka mai ba da hanya ta hanyar sadarwa. Yi gyara tsawo na bit zuwa kimanin 1/8" a sama da tebur.

Za mu yi raguwa guda biyu a cikin 1x6, kowannensu game da inci daya daga iyakar katako (wanda ya dace da tsayi mai tsawo). Kowane slot zai dakatar da 3/4 "daga gefen jirgin.

Sanya saitin mai ba da launi a kan shinge 1 "daga gefen bit.Dan gaba, sanya alamar fensir a shinge 3/4" a kowane shugabanci daga gefuna na bit. Wadannan alamomi zasu nuna alamar farawa da dakatar da slot.

Shigar da na'ura mai ba da hanya tsakanin hanyoyin sadarwa da kuma sauƙaƙe jirgin ya sauka a kan bit tare da babban abu a alamar fensin. Sa'an nan kuma, jagorancin jirgi tare da shinge har sai shingen gefen jirgi ya sadu da alamar alama. Ɗaga jirgi daga cikin bit, kuma sake maimaita dashi a gefe ɗaya. A wannan batu, zaka iya juyawa jirgin sama da kuma sanya shinge na farko a gefe guda na jirgi a cikin wannan hanya.

Raga na'urar ta na'ura mai ba da hanya tsakanin hanyoyin sadarwa sau 1/8 "kuma sake maimaita shinge hudu, ta hanyar amfani da wannan hanya. Ci gaba da wannan tsari har sai an raba duka ramuka ta hanyar cikin jirgi.

TAMBAYOYI SAFETI: Yi hankali a yayin da kake tura hatsi a kan shingen kwamfutarka, kamar yadda hatsi na ƙarshe zai iya ɗaure a kan shinge, wanda zai haifar da kullun. Yi aiki sannu a hankali da hanzari, kuma la'akari da fadada na'urar mai ba da hanya ta hanyoyin sadarwa bit gudun saurin dan kadan don hana bit burning.

03 na 10

Gwada ginshiƙan Bolt

Tare da ramukan da aka yanke a cikin jirgi na sama, mataki na gaba shi ne a yanka kashi biyu da rabi na diamita a cikin ƙananan plywood. Kowane ɗayan ƙuƙwalwar hex guda biyu zai wuce ta waɗannan ramuka, sannan ta cikin ramummuka, wanda zai ba da izini Jig don haɗuwa da dama widths na allon.

A kan teburin ku , ku ajiye ginshiƙan bishiya a kan ƙananan ƙusa, a tsakiya a kan gindi mai tsawo (kimanin inci shida daga kowace ƙarshen), kuma 2-1 / 2 "daga gefen dama na ƙananan ƙusa.

Bayan haka, ta yin amfani da fensir ɗinka, sa alama ta kowane rami a gefen hagu na ramummuka a kan plywood a kasa. Cire ɗakin jirgi na sama, sa'an nan kuma zubar da rami mai tsabta 1/2 "ta wurin plywood a kowane ɗaya daga cikin alamomi guda biyu.

04 na 10

Komawa Bolt Head

Juya gindin plywood na jigon jigon da kuma saka ƙuƙuka guda biyu ta sabon ramuka na 1/2 ". A yin amfani da fensir ɗinku, zana gefuna na kawunansu.

Cire hanyoyi, da kuma amfani da mahimman gilashi 1/2, cire kayan da ya isa ya sake kwance kusurwa a cikin gindin plywood.

05 na 10

Haɗa Jig Jigon

Tare da kusoshi guda biyu a cikin raƙuman rabin jingin jigon, kunna tushe kuma haɗawa saman rabin jig ɗin ta hanyar sakawa a kan kusoshi. Kammala taron ta hanyar ƙara daɗaɗɗen bene, sa'an nan kuma isassun kulle da kuma nutse mai reshe a kowane bugo.

A wannan lokaci, tabbatar da cewa rabi na sama zai zira kwatsam a kan ƙananan rabi kuma za'a iya kiyaye shi a wuri wanda aka ba shi ta hanyar ƙarfafa filayen.

06 na 10

Haša Matakan

Mataki na gaba na wannan shirin aikin itace na kyauta shi ne hašawa matakan gaggawa da saukewa zuwa ɓangaren sama na jig.

Matsayi tushe na kowane nau'i na biyu a ko'ina game da 1/4 "daga gefen dama na babban ɓangare na jigon jigon, game da inci biyu a cikin ramummuka. .

07 na 10

Daidaita Matakan

Tare da ƙaddamarwa mai sauƙi-sauƙaƙe da aka haɗa zuwa ɓangaren babba na teburin ya ga jigon jigon, mataki na gaba shi ne daidaita matakan. Dole ne a gyara pads na clamps don su riƙe wani abu-by stock (1x6, 1x8, da dai sauransu), amma kada ka kasance da damuwa da samfurin cewa matsin zai iya yayata takunkumi daga jig.

Tare da wani ɓangaren samfurori na ƙaya a cikin matakan, gyara tsararren ƙira ta hanyar yin amfani da ɓangaren ɓangaren ɓangaren ƙira.

08 na 10

Yanke Miter Strip

Teburin ya ga jigon jigon jima yana kusa. Mataki na gaba shine girbe gungu na samfurin a kan tebur ya ga ƙafa biyar a tsawon da zai dace cikin sashin hagu na hagu na teburin ku. Kuna so in tabbatar da girman girman da aka samu a kan sawun ku, amma yawanci, slotin miter yana da kimanin 3/4 "fadi da 3/8" (ko dan kadan). Ma'anar ita ce wajan ta yuwuwa ta yuwuwa tare da karamin wasa ta cikin rami.

09 na 10

Haɗa Miter Strip

Ƙungiyar ƙarshe ta ƙarshe ta gina ginin ta ga jigon jigon jigon don haɗawa da tsalle-tsalle a tushe na jig.

Yayin da kake fuskanci teburin gani, auna daga gefen hagu na gangarka zuwa gefen dama na gefen hagu na hagu. Ƙara ɗaya bisa takwas na inch zuwa wannan ƙimar.

Kusa, juye jig kuma auna wannan nisa daga gefen dama na jig. Amfani da madaidaicin madaidaiciya, sa alama a layi daya a wannan nisa daga gefen dama na jig.

A ƙarshe, matsayi tsiri (tare da gefen gefen gefen jigon jigon) a gefen layin da ke gefen gefen hagu na jig, kuma ya haɗa zuwa jig tare da wasu sutura 1-1 / 4. Tabbatar da haɗuwa da ƙwaƙwalwar ƙwaƙwalwar ƙira don tabbatar da cewa kawunansu suna jin dadi kuma ba su da kariya a fuskar fuskar.

10 na 10

Kashe mai shiga Jig

Ƙarshen mataki na gina teburin ya ga jigon jigon kuɗi shine a datse gefen jig.

Tare da teburin ga ruwa a ƙarƙashin gefen gado, sanya matsayi mai tsutsa a cikin rami na sutura kuma tabbatar da cewa jigon jigon yana zub da hankali a duk tsawon teburin, tare da takaitaccen wasa na gefe zuwa gefe. Idan kayi wasa ta gefen gefe, za ku iya komawa matakai guda biyu kuma kuyi dan tsayi.

Da zarar ka gamsu da motsi na jigon jingina, cire jig gaba daya zuwa gaba (ga jikinka), tada ruwa kadan a kan 3/4 ", fara satar da kuma datse gefen hagu na mai shiga jig.

Tebur ɗinku ya ga jigon jigon yanzu ya cika. Don amfani da jig, matsayi wani jirgi da kake son sanyawa cikin jig, tare da sassa na hukumar da kake so ka cire kawai a gefen hagu na jig. Kuna iya buƙatar daidaita kwayoyin reshe don yadawa ko kuma kunkuntar nauyin jig don saukar da allon ɗakuna daban-daban.

Tare da jig gyara da kuma jirgi a cikin matsayi da ake so, tada murfin zuwa tsawo kamar sama da samfurin, fara sautin da kuma datse kayan. Kamar yadda kowane teburin ya ga aikin, kada ku tsaya kai tsaye a bayan ruwa, amma a gefen hagu, kawai a yanayin kickback.

Don kayyade gefen gaba ɗaya na samfurin (don haka gefen gefen gefe zai zama daidai), kawai amfani da teburin tare da shinge. Kuna buƙatar tebur ya ga jigon jigon don gyara ɗaya gefen jirgin.

TAMBAYA: Ka tuna cewa wannan jig, kamar yadda aka tsara a cikin waɗannan tsare-tsaren, shine na jirgi bai fi ƙafa huɗu ba. Don allon da ya fi tsayi, kuna so ku yi jig.