Yadda za a Yi Farmhouse, Butler's ko Belfast Style Sink a Dolls House Scale

01 na 10

Yi Dogonhouse Scale Sink a Farmhouse, Butler ta ko Belfast Style

A zurfin square kora yumbu sinks ƙaunataccen decorators da dogon tarihi. Sau da yawa ana kiransa Farmhouse ya rushe a Turai da Arewacin Amirka, an kuma san su kamar Belfast ko Butler's sinks. Dukansu suna samuwa a cikin hanyoyi daban-daban, mafi mahimmanci suna zama a madaidaiciya a madaidaiciya, amma bambance-bambance tare da gyaran gyare-gyare masu mahimmanci, ƙananan goshi da goshi na gaba ko kuma gefuna na gefe suna da yawa.

Wadannan kullun suna nutsewa a cikin gonakin gidaje ne kawai aka sanya su daga katako na katako na katako, wanda ya gama da epoxy putty , yumbu mai yumbu , yumɓu mai iska, ko gesso don ba shi kullun yumbu idan ya gama da gashi mai launin farin ko cream acrylic da kuma karshe m acrylic bayyananne gashi ko gashi na fili ƙusa goge. Abubuwan da aka nuna a hoto a kan wannan shafin ba su gama ba (za ku iya ganin ginin da ya ƙare a ɗakin bayanan a cikin wani bayanan karshe). Mun sanya wannan rushe a cikin ma'auni na kasuwancin (29 inci by 18 inci ta 10 inci mai zurfi) ya ragu zuwa 1:12 sikelin. Yana da sauƙin isa zuwa sikelin 1: 6, ko ƙasa zuwa 1:24 da 1:48 sikelin.

A karamin ƙarami, ƙila za ku so ku ƙyale akwatin katako, ku kuma sanya akwatin asali daga katin kaya ko takarda. Zaka iya amfani da kaya mai yawa ( gwanon gida ko zane-zane) don yaduwa mafi girma maimakon itace idan kana so.

Kamar yadda aka kwatanta, Mun nuna bambancin rushewa a ci gaba da ake samuwa daga yumburan polymer a cikin jelly / jam kungiya ɗaya. Idan kun kasance turɓaya da kunshin tare da ƙoshin murƙin kuji ya kamata ku iya siffar yumbu a cikin mold kuma ku saki shi don gasa ko warkewarta. Kamar yadda kake gani a hoto a kan wannan shafi, sinks da aka sanya a cikin waɗannan kayan su ne mafi ƙanƙanci fiye da sinks da aka yi wa ma'aunin zurfin gwaninta. Za su iya yin aiki don karamin ƙarar da aka yi ta wannan hanya.

02 na 10

Jerin abubuwan da ake amfani dashi don yin Gidan Gida na Dollhouse

Don yin Gidan Gidan Gidan Gidan Gida ko Ƙarƙashin Butler Za Ka Bukatar

• Gidan itace ko zane-zane, kwalliya, katin ko takarda ya dogara da sikelin. Don ƙwanƙwasawa 1:12 mun yi amfani da katako na 1/16 (lemun tsami) ko basswood.
• Gesso mai fasaha ko yumɓu na laka ko yumɓu mai iska (Das ko wani abu mai kama da haka).
• White Acrylic Paint
• Fine Sandpaper
• Craft Knife
• Tashar injiniya
• PVA (farar fata) ko gwanin gwanin (rawaya)
• Ƙungiyoyi
• Acrylic Paint - fararen, cream ko bisque su ne mafi yawan launi na wadannan sinks.
• Shafin Farko mai Mahimmanci ko Shafin Farko mai Mahimmanci ko Fassara Nailpolish don farfadowa na ƙarshe akan rushewa.
• Eyelet - don nutse magudana. (gyare-gyare ko ɗakunan kundin takalma ko rivets na fata suna aiki da kyau) mun yi amfani da idanu na 3/16 (4.7mm).

Lura: - wani pdf (karatun acrobat da ake buƙatar) ana iya saukewa kuma an buga shi don tunani.

03 na 10

Yanke kayan da ake amfani da shi don Farmhouse Sink Base

Yanke sassa don gidan abincin gidan abinci. Za a iya yin tushe daga itace ko littafi don rushewa na 1:12 ko 1: 6. Don ƙananan sikelin, zaka iya amfani da akwatin zanewa ko katin m.

Mun zana rushewa zuwa ma'auni na yau da kullum don raguwa na mai inci 29 mai zurfi da 18 inci mai zurfi da goma inci mai tsawo. Wannan ya kamata ya dace a cikin wani zane-zane na 30-inch, wanda shine ma'auni mai kyau don cin abinci.

Don masaukin gona na 1:12 ko farfadowa na farfajiyar za ku buƙaci waɗannan yanki. Mun fara yanka katako na itace 13/16 (17mm) mai fadi daga karfe 1/16 (2mm) na samfuri don saita nisa ga dukan sassa sai dai tushe.

• Bas: 2 1/4 ta 1 3/8 inci, (5.6 cm ta 3.4 cm) a yanka daga 1/16 (2mm) inch mai haske
• Gabatar da baya: Yanke sassan 2, 2 3/8 inci (6 cm) tsawo da 13/16 inch (17mm) fadi daga 1/16 inch (2mm) stock
• Kashe Yanke guda biyu, 1 3/8 inci (3.4 cm) tsawo da 13/16 inch (17 mm) fadi daga 1/16 inch (2mm) stock.

04 na 10

Haɗa Tushe don Ginin Goma a Dollhouse Scale

Don tara tushen gindin ginin gine-ginen gida, kuma duk yanke gefuna tare da sandpaper mai kyau a kan shinge na yanki. Idan ka san inda kake son rudin rami ka kasance zaka iya yin rawar rami don dace da girman goshin da kake amfani dashi.

Hanya kashi biyu na ƙarshen yanki tare da ƙarshen tushe saboda haka tushe yana kan iyakar. Lokacin da manne ya bushe a kan iyakar da tushe, kayi gaba da baya don haka su rufe gefuna da iyakar da kuka fara da gindin tushe. Haɗa akwatin tare tare da bada izinin bushe.

05 na 10

Zagaye gefuna na Gidan Gidan Gidan Goma

Gidajen gonakin gargajiya na da gefuna da gefe. Ko da wane irin kayan da kake son amfani da shi don kammala rushewarka, ya kamata ka yi amfani da toshe sanding zuwa zagaye na sasannin waje da kuma gefen babban gefen ɗakin gona. Don yin wannan, rike takalmin sanding a kusurwar mataki 45 a kusurwa, kuma yashi a kusurwa, sa'annan a yashi yashi sasannin kusurwa hudu da kuma gefen gefe kewaye da duk gindin ginin da aka nuna.

06 na 10

Fit Fitar Dink din

Hakanan zaka iya yin magudin ruwa don tushe na rushe gonar ka. Mun yi amfani da gashin ido na 3/16 inch 4.7mm kuma muka rushe wani rami a gindin ganga don karban shi. Za a saka idon ido a cikin rami na rami a lokacin da gashin gashin karshe ya bushe.

Yawancin gonaki da Belfast sinks suna da lambatu a tsakiya. Akwai yiwuwar samun ambaliya ko 'weir' a gefe na nutse kusa da lambatu. Idan kana so ka dace da 'weir' zuwa rushewarka, zai fi sauki idan ka gama rushewarka tare da yumɓun iska mai laushi, sannan ka yi amfani da wani itace, wanda aka rufe shi da filastik, a matsayin nau'i don kwaɗaɗɗen ciki wanda kake kunsa lãka.

07 na 10

Yi Mintuna Belfast ko Butler ta Gina tare da Wurin Fila

Mafi mahimman tsari na ginin gonar gona yana da gaba marar kyau tare da sasannin sasantawa mai kyau. Don yin nutsewa a cikin wannan salon, zane mai laushi, sassauka mai sassauci na gesso a cikin ciki da kuma gefen waje na rushewa. Yarda da gesso ya bushe sosai a tsakanin tufafi, yayyafa kowanne laka don sasantawa kafin amfani da wani gashi. A hoto a kan wannan shafi, rushewa tana da gashin gashi na farko, a shirye ya zama sanded. Kuna buƙatar layi uku zuwa hudu na gesso don ƙirƙirar shafi mai tasowa don rushewa. Lokacin da kake da takalmin gyare-gyare a matsayin mai santsi, yayyafa rushewa tare da launi na farin ko cream acrylic Paint kuma yale ya bushe sosai. Aiwatar da takarda na karshe na tsabta (acrylic varnish ko ƙusa goge) don kammala rushewar ku kuma dace da gashin tsuntsaye a wuri.

Yi hankali a lokacin da yanda aka safar da ginin, da tsararru, kuma mafi mahimmanci za a bayyana rushewa na karshe.

08 na 10

Shart Shafa Hanya da aka Fice a Gidan Goma

Wani sashi na rushe gonaki yana da gaba a gaban, tare da ko ba tare da wata murfin 'gefen' 'gefe ba' a saman. Wannan rushewa zai iya zamawa a cikin ruwa mai laushi wanda aka kwashe a kan gindin katako, sannan a bar shi ya bushe, sannan a sandar, ko za a iya gina shi a cikin sassan gesso. A nan za ka iya ganin rushewar da aka fara a gesso. An rufe zagaye na katako a cikin gashin farko na gesso don nuna alama mai tsauri a gaban rushewa.

09 na 10

Gina Datti na Tabba a Gidan Dakin Goma

Da zarar an fara bushe na farko na gesso (ko yumbura mai iska), zaka iya yashi da sauti a kan fararen farko na gesso ta yin amfani da takalmin sandan da aka yi birgima a kan yatsotsi mai yatsa ko mai sarrafa fayil sannan fara fara fuska da zubar da ciki tare da Layer na biyu na gesso yayin da ka ƙara girman kai.

Don ƙara maɓallin katako, an ajiye wani gefen gindin itace ko filastik a kan gefen gaba na rudun, kuma an sanya karin gesso a saman gefen sama har zuwa nau'i. Da zarar gesso ya zama bushe, an cire siffar a hankali. Lokacin da gesso ya bushe bushe zai iya zama gefe tare da takalma a kan sandan sanding, da kuma kowane ramukan da suka cika gesso.

Ci gaba da gina ƙuriyoyinsu da yayata su, da kuma gina ginin da kuma yin takalma. Idan kana son duka sauti biyu da maɓallin katako, mai yiwuwa ya fi sauƙi don samun sauti na farko da kuma sanda zuwa siffar ƙarshe, sa'an nan kuma ƙara maɓallin katako. A cikin samfurinmu, mun yi ƙoƙarin gina duka sauti da kuma baki a lokaci ɗaya, wanda shine matsala yayin da kuka yi sauti.

10 na 10

Yi Shingen Goma tare da Ƙafaren Ƙaƙwalwar Ƙasar

Bambanci na ƙarshe a cikin saitin shinge na gonaki shi ne rushewa tare da alamu mai tasowa a gaba. Wannan yana aiki mafi kyau idan kuna amfani da yumbu a kashin ginin ku. Zaka iya yin shi tare da gesso, amma dole ne a yi a lokacin da gesso ya kasance mai taushi, amma a ɓoye.

Don yin nutsewa tare da yumɓu na yumɓu ko wani yumɓu mai yumɓu mai iska, gina gine-gine kamar yadda kake yi don ginin gizon da aka rufe, tabbatar da cewa ya bushe sosai.

Lokacin da tushe ya bushe ya yi amfani da man shanu na PVA zuwa fannin katako, ciki da waje. Yi juyi na yumɓu mai yumɓu mai laushi / takarda, sa'annan ya sanya yumbu a cikin shinge mai yaduwa kamar yadda za ku gusa kullu a cikin layi. Yi hankali a kan laka a cikin manne, da kuma sama da gefen gefen ganga, gluing yumbu a waje na nutsewa.

Yi amfani da samfurin gyaran kayan aiki don sassaka lakaran yumɓu, ajiye shi damp kuma mai sauƙi.

Lokacin da kake da laushi mai laushi na yumɓu mai iska a kan kashin ka, danna rubutun zane-zane, ko ƙananan alamu, a gaban rushewarka don yin yanayin da ya dace.

Yarda da yumɓu mai iska ya bushe, kuma cika dukkan wani ɓangaren da ke ci gaba. Yashi da yumɓu mai yumɓu, yayyafa abin kwaikwayo a gaba kawai idan ya cancanta. Bada damar bushe. Yi zane tare da zane-zanen acrylic, bari ya bushe sosai kuma gama tare da shafi na cikakke cikakke, acrylic ƙasa da kakin zuma, ko ƙusa goge.