Shirye-shiryen Wine Rack Plans - Kyawawa da Ƙari

01 na 08

Shirye-shiryen Wine Rack Plans

Gwajin ruwan inabi shine aikin aikin katako mai mahimmanci. Duk da haka, ina tsammanin wannan nauyin ruwan inabi mai ban sha'awa ne mai matukar farin ciki ga kowane mai aikin katako, saboda yana buƙatar yin gyare-gyare da tsalle . Don irin wannan aikin mai sauƙi, mutane da yawa sunyi sharhi game da yadda kullun yake da kyau lokacin da wasu suka haɗa tare kuma sun cika da giya. Saboda yana da karfi, duk da haka zane-zane na zamani, babu ainihin iyaka akan yawan raka'a da za a iya tattara a kan juna. A cikin hoton da ke sama, mun kafa guda biyar daga cikin raka'a don riƙe 30 kwalabe.

Zaka iya amfani da kusan kowane itace da kake so don gina waɗannan tsarin aikin itace na kyauta, amma ka tuna cewa bangarorin suna buƙatar sautin mai-inch. Wannan na nufin sayen samfurin 2x da ajiye shi, ko siyan sayen 4/4 a mai sayarwa mai aiki mai kyau, wanda zai ƙayyade zaɓin ku na samfur ga waɗannan nau'in samuwa a cikin 4/4 a lokacin sayanku.

Sauke abin da za a gina wannan madaukar ruwan inabi (PDF).

• Matsalar Difficulty
• Tsuntsu: Sauƙi
• Ƙarshe: Paint ko bakin ciki na zaɓi
• Lokaci don kammala
• 2-3 Hours
• Gudanar da Kayayyakin
• Miter Saw ko Circular Saw
• Sawunan Safiyo ko Radial Arm Saw tare da Dado Saita
• Band Saw ko Jigsaw
• Cordless ko Corded Power Drill
• Claw Hammer
• Layout Square
• Abubuwan Da ake Bukata
• Ɗayan (1) Shine 4/4 (1 "lokacin farin ciki) 6" x 20 "- itace na zabi
• Daya (1) 1x4 6-feet tsawo - itace na zabi
• Ɗaya daga cikin (1) 3/8 "diamita mai laushi, 6" tsawo
• Fensir
• Ƙirƙusa ko 3 "diamita Circle don alamar
• Kayan aikin Woodworker
• Matar da aka Sassauke
• Sandpaper

02 na 08

Fara tare da Sides

Mataki na farko don gina gwanon shine aiki a bangarorin biyu. Ana yin waɗannan daga 4/4 (1-inch lokacin farin ciki) samfurin nau'i na zabi. Oak da Maple suna yin kyawawan zaɓi idan an yi amfani da na'urar, yayin da Poplar mai ban sha'awa ne idan kuna son zub da ragon.

Yanke kowane ɓangaren guda biyu na 4/4 stock zuwa 6 "x 9-3 / 4".

Bayan haka, kuna buƙatar yanke waƙa huɗu a kowane yanki don saukar da gaba da baya na naúrar. An yanke waɗannan ɗakuna a kan gefuna (9-3 / 4 "), 3/4" daga kowane ƙarshen. Ƙofofin za su kasance 1/2 "zurfi da 3/4" fadi (nisa na 1x stock da aka yi amfani da gaba da baya).

Don yanke ƙuƙunni, saita samfuri don saitawa a ko dai Sawalin Saitinka ko Radial Arm Saw zuwa 3/4-inch a cikin kauri, kuma saita zurfin zuwa 1/2-inch.

Saboda za ku yanke yankuna a kan gefen, zai zama mafi kyau kuma mai sauƙi don rufe bangarorin biyu tare da yanke dadoes a kan guda biyu na samfuran a lokaci guda. Idan kun yi shirin gina ginin fiye da ɗaya na wannan ruwan inabi, ku yi ƙoƙari ku yanke bangarori hudu a lokaci guda. Idan kayi amfani da teburin , tabbas za a yi amfani da ma'auni don jagorancin samfurin - kada ku yi amfani da shinge, kamar yadda samfurin zai iya ɗaure a kan shinge yayin da yake tafiya ta cikin gabar.

Da zarar an yanke katutu guda hudu, motsa kan cutout a cikin sassan. Kuna iya yanke rabi biyu 2-1 / 4 "sannan ku tsaftace samfurin tsakanin jigsaw ko kuma yanke dukkanin yanke tare da jigsaw.Munan gefen ramukan zai kasance 2-1 / 8" daga gefuna (tare da gefe layin tsakiya), tare da dukan nisa na cutout 5-1 / 2 ", kamar yadda aka nuna a cikin zane-zane (wanda za'a iya sauke daga shafi na farko na wannan labarin.

Ƙarshen aiki na karshe a kan bangarori na gefe shine a yanke ramin diamita 3/8 "(kimanin 1/4" zurfi) a tsakiya a cikin ɗayan ɗakoki hudu don saukar da salula a cikin wani mataki na gaba.

03 na 08

Gabar Ginin Wine

Yanzu da an gama ɓangaren ɓangaren ruwan inabi, za mu matsa zuwa kan gaba na ɓangaren.

Yanke sashin 1x4 (daga cikin itatuwan da aka zaɓa) zuwa 28-5 / 8 "a tsawon, sannan kuma a raba shi zuwa nisa 2-1 / 4".

Idan kana yin ɗaya daga cikin waɗannan raka'a, za ka iya so ka yi amfani da maɗaura na band ko jigsaw don ka yanke ƙuƙuka don kwalabe, amma idan kana gina ƙirar maɗauran, za ka iya ajiye wani lokaci a wannan mataki ta amfani da 1x6 kuma ka yanke ƙuƙwalwa tare da tsinkin 1-5 / 8 ", sa'an nan kuma sutsa jirgi a tsakiya a kan teburin ka ga ƙimar 2-1 / 4".

In ba haka ba, akwai buƙatar ka yanke maki shida da rabi a zagaye na gaba tare da jigsaw ko band saw . Ƙungiyoyin za su fara 3-1 / 2 "daga daga ƙarshen ƙarshen, kuma suna rabawa 2-3 / 8" baya, kamar yadda aka nuna a cikin tsare-tsare kyauta kyauta (daga shafi na 1).

Da zarar an yanke ƙuƙunni shida, za ku zama yankan dadoes a gefe guda, kamar yadda muka yi a tarnaƙi. A wannan yanayin, duk da haka, dadoes sun kasance 1 "fadi da 1" daga kowane ƙarshen. Duk da haka, har yanzu suna da 1/2 "zurfi.

A ƙarshe, yi rawar rami 3/8 ", 1/4" mai zurfi, a tsakiya a cikin kowane ƙaura don saukar da layin a cikin wani mataki na gaba.

04 na 08

Komawar ruwan inabi

Aikin karshe na itace mafi girma a cikin wannan aikin shi ne ƙirƙirar baya na ruwan inabi. Hanyar yana da kama da gaba, sai dai ramukan giya na ruwan inabi zai zama "4 diamita maimakon 1-5 / 8". Za a iya kammala wannan ta amfani da ɗan rami na rami 4 a kan raga mai haɗari , amma tabbas za ku sami sakamako mai kyau ta amfani da jigsaw ko band saw.

Idan kuna so ku yanke yanki a kowanne ɗayanku, kuna son farawa ta hanyar sa alama ga sakonni, wanda aka yanke zuwa 2 "radius arc, 1" zurfi cikin yanki. Cibiyar ta farko ta arc shine 4-5 / 16 "daga ƙarshen, to, kowane inci hudu a tsakiya .

Da zarar kana da akwatunan da aka nuna, za ka iya satar da ƙwayar kayayyaki zuwa 2-1 / 4 "lokacin farin ciki tare da arcs kowane 1" zurfi. Sakamakon karshe na yanki shine sake 28-5 / 8 ".

Bayan dacewa yanki zuwa nisa, za ka iya yanke gumaka tare da jigsaw ko band saw.

Ƙarshe yanke dadoes kuma sanya raƙuman zane, kamar yadda aka yi a gaba.

05 na 08

Sanding da Gyara Wurin Wine

Yanzu da aka kammala aikin katako, muna matsawa zuwa sanding da gamawa.

Gashi kowane ɓangaren guda hudu na ruwan inabi mai mahimmanci ta yin amfani da sandpaper mafi kyau. Kammala da sanding hannun don cikakkiyar taɓawa ta karshe.

Kusa, tsaftace dukkan kayan da aka yanke daga tsararren kuma shafa shi da kyau tare da zane. Bayan haka, yi amfani da paintin ko launi na zabi. Idan kana da tsire-tsire masu laushi, zaka iya so ka yi amfani da na'urar kwalliya mai tsabta don taimakawa wajen fitar da sutura. Sa'an nan kuma, bayan wanka, yi amfani da wasu kaya na polyurethane don kare itacen.

06 na 08

Ƙara Dowels

Ƙarshen mataki kafin taron shine sanya ɗakin a cikin ramuka a cikin dadoes. Yanke guda takwas na 3/8 "dowel zuwa 1/2" a tsawon. Sanya jeri na manne a cikin kowane rami na rami na daya daga cikin gefe guda, sa'an nan kuma danna takalma ɗaya a cikin kowane ramukan hudu. Yi amfani da wani toshe na katako itace don samun zakka da kyau a cikin rami.

Biye tare da hanya guda a gefe ɗaya.

07 na 08

Haɗa Gumar ruwan inabi

Yanzu da aikin aikin katako ya cika, zamu tara ruwan inabi.

Haša gaban shan giya a gefen hagu na dama ta hanyar zamewa a kan juna, kamar yadda aka nuna a hoton da ke sama.

Ci gaba ta ƙara daɗaɗar ruwan inabi a gefen dama a cikin irin wannan hanya. Bayan haka, hašawa gefen hagu na gaba zuwa gaba da baya na ruwan inabi a dadoes.

Bincika duk haɗin haɗin huɗu don tabbatar da cewa duk ƙafafunni huɗu suna da kyau a zaune.

08 na 08

Ƙara Wine!

A wannan batu, an yi ku da farko. Zaka iya ƙara ƙarin raƙuka don gina saitin kafa ko kuma ƙara dan giya zuwa ragowar ka. Idan kana da karin giya, za ka iya ƙara ƙarin dodoshin!

Kana buƙatar ra'ayoyi don wasu manyan giya don ƙara wa ɗayan giya? Jagoran Winerenmu zai iya taimaka maka samun ruwan inabi a kowane lokaci.